Salter Brecknell DCSB Pegasus Digital Floor Scales
currently in stock
Shipping Weight: see below
(estimate shipping cost)

• Divisions– NTEP approved for 5,000
  divisions
• Displays– Up to 50,000 graduations
• Enclosure– ABS NEMA 12 enclosure
• Load Cells– Drives up to four 350Ω load cells
• Serial Port— Full duplex RS-232 serial port
• Digital Calibration— Full front panel calibration
• Construction— Stainless steel swivel stand
• Power Requirements— Operates on AC adapter or 12 Volt DC
• Display— LED display

• Load Cell Excitation – +10 VDC
• Load Cell Current – Drives up to four 350Ω load cells
• Analog Signal Input Range – 0.2 mV/V min to 3.0 mV/V max
• Analog Sensitivity – 0.4 μV/grad, minimum 1.0 μV/grad recommended minimum for legal-for-trade
• A/D Conversion Rate – Up to 25 meas/sec
• A/D Resolution – Up to 260,000 internal counts
• Display – 0.6", 6 digit
• Display Resolution – Up to 50,000 external grads, selectable
• Keyboard Functions – Units, Zero, Net/Gross, Tare, Print
• Annunciators – Gross, Net, kg, lb, Center of Zero, Stable, Tare, Negative, PCS
• Serial Port – Full duplex RS-232 format
• Power Requirement – 12 VDC, 500 mA wall adapter (included)
• Indicator Dimensions – 3.2" x 6.8" x 2.3"
• Operating Temp – -10° C to 40° C (14° F to 104° F)
• Certifications – NTEP, COC #00-065A1

The Salter Brecknell 200ES is a general purpose, digital indicator housed in a stainless steel NEMA 4x enclosure. It comes with a large (.6\") green LED screen for easy readout of up to 50,000 display divisions

• Divisions - NTEP approved for 5,000 Divisions
• Display Graduations - Displays up to 50,000 Graduations
• Load Cells - Drives up to four 350Ω Load Cells
• Enclosure– Stainless steel NEMA 4X enclosure
• Stainless Steel Swivel Stand
• Full Front Panel Configuration

• Serial Port— Full duplex RS-232 Serial Port.
• Display— Easy to read LED display.
• Digital Calibration— Full front panel calibration.
• Load Cell Excitation— +10 VDC
• Load Cell Current— Drives up to four 350Ω Load Cells.
• Analog Signal Input Range— 0.2 mV/V min to 3.0 mV/V max.
• Analog Sensitivity— 0.4 μV/grad, minimum. 1.0 μV/grad recommended minimum for Legal-for-Trade
• A/D Conversion Rate— Up to 25 meas/sec.
• A/D Resolution— Up to 260,000 Internal Counts.
• Display— 0.6", 6 Digit LED Display.
• Display Resolution— Up to 50,000 External Grads, Selectable.
• Keyboard Functions— Units, Zero, Net/Gross, Tare, Print.
• Annunciators— Gross, Net, kg, lb, Center of Zero,
  Stable, Tare, Negative, PCS.
• Serial Port— Full Duplex RS-232 Format.
• Power Requirement— 110/220 VAC, 50/60 HZ
• DC Power Consumption— 200 mA + 30 mA/350Ω Load
  Cell.
• Indicator Dimensions— 8.86" x 2.83" x 5.5"
  Indicator with Stand Dimensions— 9.09" x 2.95" x 7.32"
• Operating Temperature— 10°C to 40° C, 14° F to 104° F
• Certifications— NTEP, COC #00-065A1

Optional Floor Stand