Asker Super EX Hand Durometers / Hardness Tester from Hoto Instruments Asker Super EX Hand Durometer / Hardness Tester from Hoto Instruments tests the hardness of various rubber, elastomers and plastic products. Super EX durometers are portable, simple to use and heavy duty with high repeatability.
- Available with or without a peak indicator
- ±1 point accuracy
- Type A for normal rubber
- Type D for hard rubber & plastics
- Type C for soft rubber and sponges
from $295
Imada FB-Series Mechanical Force Gauges
Simple and virtually maintenance free, no batteries needed, intrinsically safe in hazardous environments, tare ring, real time and peak mode, comes with full set of accessories, available in either oz, lb, kg or newton versions
- 32 x 0.25 oz
- 2 x 0.02 lb
- 5 x 0.05 lb
- 10 x 0.1 lb
- 20 x 0.2 lb
- 30 x 0.25 lb
- 50 x 0.5 lb
- 100 x 1 lb
- 150 x 1 lb
$430
Imada PS-series Mechanical Force Gauges
Ergonomic, heavy duty metal construction, ±0.2% F.S accuracy, tare ring, real time and peak mode, comes with a full set of accessories, available in either oz, lb, kg or newton versions
- 32 x 0.25 oz
- 80 x 1 oz
- 2 x 0.01 lb
- 5 x 0.025 lb
- 10 x 0.05 lb
- 20 x 0.1 lb
- 30 x 0.2 lb
- 50 x 0.25 lb
- 100 x 0.5 lb
$470
Asker X High Performance Hardness Tester / Hand Durometers from Hoto Instruments Asker X High Performance Hardness testers from Hoto Instruments feature portable design, ease of operation, non-destructive measurement and an optional peak indicators. Designed for testing the hardness of rubber, plastics, sponges and foams.
- Available with or without a peak indicator
- ±.75 point
- Type A for normal rubber
- Type D for hard rubber & plastics
- Type C for soft rubber and sponges
- Type F for urethane foam, sponge and polystyrene foam
from $540
Dillon X-Series Mechanical Force Gauges
Proven accuracy and ruggedness sets the Dillon X-C compression, X-ST tension, and X-PP push pull mechanical force gauges apart. Highly engineered materials, close machining tolerances and proper heat treatment provide optimum strength and spring characteristics. Ideal for stand alone force applications or often used as the load defining component of a much larger system. Optional maximum reading pointer or shockless dial indicator available.
- Capacity: 25 to 50000 lbs (10 to 20000 kg)
from $598
Imada ESH- and PSH-Series High Capacity Force Gauges
Rugged design for heavy usage, tare ring, real time and peak mode, comes with full set of accessories, comes in either lb or kg versions, intrinsically safe in hazardous environments
- 200 x 2 lb
- 200 x 1 lb
- 300 x 2.5 lb
- 300 x 2 lb
- 400 x 4 lb
- 400 x 2 lb
- 500 x 5 lb
- 500 x 2.5 lb
Tanita KD-200 Digital Scale
Was $179.95 1000 x 1 g (0-35 oz x 0.05 oz) - now $79.95
2000 x 2 g (0-70 oz x 0.1 oz) - now $82.95
5000 x 5 g (0-11 lb x 2 oz) - now $84.95
