|
Imada
MH-220 Motorized Horizontal Test Stands
 |
Imada
MH-220 Motorized Horizontal Test Stands
currently in stock
Shipping
Weight: 40 lbs. (estimate shipping
cost)
This month
only! FREE UPS
Ground Shipping on ALL Imada
test stands
|
|
MH-220BA (Basic Type)
MH-220AC (Auto Cycle Type)
- Max Load: 220 lbs
- Stroke: 16"
- Optional dynamic and static distance meter available
Features and Specs
Speed Configurations
| Standard Speed |
0.4 ~4" / min |
| Optional High Speed |
0.8 ~ 8 " / min |
| Optional Low Speed |
0.2 ~ 2 " / min |
Optional
Data Buttons and Data Software
Imada
DB-Series
data
input buttons work with Imada
SW software to automate data collection from Imada force
or torque gauges. Enter peak measurements into the spreadsheet
and "zero" the gauge with a touch of the button.
Minimize computer time and mouse useage
Click here for more info...
Imada motorized test stands offer consistent and reliable
testing. Our Basic or Auto Cycle models are available
in Standard, High, and Low speeds. They accept any
of the standard range Imada force gauges and special attachments.
Optional dynamic and static distance meters are also
available Basic Models: MH-220BA Basic Models have top and bottom travel limits that
can be adjusted for a precise range of movement. Set
the travel limits, flip the direction switch up to
move the cross head up to the top travel limit at the selected
speed. Flip the direction switch down to send the cross
head down to the bottom travel limit. The speed is
set by a Speed Adjust knob. Quick Return and Emergency
Stop features are also included.
Auto Cycle Models: MV-220AC
Auto cycle models have top and bottom travel limits
that can be adjusted for a precise range of movement.
Speed Adjust, Quick Return and Emergency Stop features
are also included. These stands have three function
modes
Manual Mode
While the Direction switch is held up, the head moves up. Holding the switch
down moves the cross head down. When the switch is released the head stops.
This mode is ideal for positioning.
Single Cycle Mode
When the Direction switch is pushed up, the cross
head moves up at the desired speed, and when
it reaches the top travel limit, it automatically
goes back and stops at the bottom travel limit,
completing one cycle. Pushing the switch down
runs the cycle in reverse.
Auto Cycle Mode
This mode is similar to Single Cycle mode, except
that the cross head travels up and down repeating
the cycle until either the Power or Emergency
switches is turned off. This mode is ideal
for applications such as fatigue testing.
|
