|
Imada
Data Buttons
 |
Imada
DB-Series Data Input Buttons
currently in stock
Shipping
Weight: 1 lb. (estimate shipping
cost)
|
|
- DB-1: one
channel mode -- collects force or torque data
- DB-2: two
channel model -- collects both force and displacement data
(use with test stands equipped with digital distance meters)
- SW-1: Data
Acquisition Software
- Send data to the PC spread sheet with the touch of a
button
- Zero the gauge
- Select different acquisition rates
DB buttons work with Imada SW software to automate data
collection from Imada force or torque gauges. Enter peak
measurements into the spreadsheet and "zero" the
gauge with a touch of the button. Minimize computer time
and mouse useage.
DB-1 Data Button
-- Single Channel
DB-1 is a simple, compact, one channel interface that enables
the user to send measurement data to a PC running SW-1, Imada
data acquisition software, or other software.
Single data mode simplifies
peak measuring tests because it also ‘zeros’ the
gauge after sending the data to the computer, thus eliminating
the need to reset manually for each test.
Automatic acquisition mode allows
users to select different acquisition rates from 20 data/second
to 1 data/999.9 seconds. Start data acquisition by clicking
the button, then click again to stop, which simplifies start/stop
functions by eliminating the need to use computer mouse and
screen to control testing. This allows users to focus on
the testing rather than the PC and the data acquisition spreadsheet.
As a visual confirmation, the LED lamp will light up for
both single data and automatic acquisition modes when data
is being sent to the computer.
No external power supply is needed as power is supplied
through the PC. Connect Imada gauges to the data input button
with cable CB203 and the computer to the data button with
a 6' DB9 serial cable (included with DB-1).
DB-2 Data
Button -- double channel
Collect both force and displacement data for analysis with
the SW-2 Imada data acquisition software and DB-2 data button.
|
