| |
Dillon
EDExtreme Digital Dynamometers
 |
Dillon
EDXtreme Dynamometers
Order Below
currently in stock
Shipping
Weight:see specs below. (estimate shipping
cost)
Dillon EDXtreme -- for
the toughest jobs you face
Guesswork is not acceptable -- failure is not an
option. When you have people working around high
tension cables and massive loads, there's no room
for error. You have to have complete confidence in
the strength and accuracy of your measurement tools.
Uncompromising on Safety --
adaptable to the need
The EDxtreme exemplifies the trademark precision
and rugged construction of Dillon dynamometers. Its
highly refined design draws on the inherent strengths
of premium grade materials to achieve a
5:1 minimum factor of safety.
While the EDxtreme may be configured for something
as simple as a digital hanging scale, it offers a
higher level of intelligence. With user-defined functions
and sophisticated communication options, the EDxtreme
readily adapts to multi-tasking operations or multi-link
systems capable of monitoring a series of critical
stress points from a single location: it
is the definition of application versatility. |
Features
Extreme engineering
Building a precision instrument that can survive
real-world punishment requires masterful engineering. This
is where Dillon's experience shines through. The engineers
assigned to the EDxtreme drew on a depth of industrial application
knowledge and conducted exhaustive materials testing to achieve
the highest structural integrity.
Superior strength and corrosion resistance -
High capacity models are constructed of electroless nickel-plated
aircraft-quality alloy steel. Lower capacity models are anodized
aircraft-quality aluminum. 5:1 factor
of safety - This measure of strength and safety is
maintained in all capacities. Computer modeling confirms
the low stress and the long product life that is inherent
in the EDXtreme design. Retained hardware -
Allows permanent attachment of centering spacers, which eliminates
fumbling during high capacity rigging. NEMA
4X/IP55 - The EDxtreme is clearly the choice for reliability
in any environment -- in plant or out on the job site.
Xtreme accuracy: 0.1%
High resolution and accurate repeatable readings
are essential to proper weighing. The higher standards set
for the EDxtreme meant taking the time to ensure that material
characteristics, load element design and strain gauge meshed
perfectly. The result of that effort is a typical accuracy
of 0.1% of full scale capacity. The enhanced resolution made
of 1 part in 5000 provides the level of readability needed
for refined weighing.
Xtreme ease
- Exclusive SOFTKEY interface -
Dillon has eliminated confusing menus for faster setup
and simple operation. In addition to lbf, kgf and Newtons,
programmable functions can correct for gravitational variations
and allow the use of custom units of measurement.
- Wide andle LCD - Provides
improved readability over a wider viewing angle and is
available with backlighting for low light conditions.
- Battery operation - The EDxtreme
is powered by two standard C-cell batteries. Batteries
are easily accessible for fast replacement.
.
Additional Features:
- Popular industry-standard shackles insure proper fit
- Battery compartment with easy access without tools
- Sturdy aircraft-quality aluminum (or plated alloy steel
case on high capacity models)
- High-resolution dot-matrix LCD display offers large numbers
without confusing abbreviations or multipliers
- Injection molded, thick Lexan panels offer superior impact
protection
- Softkey interface allows easy and intuitive operation
and configuration
- NEMA 4X/IP55 designed for weather and water resistance
- Rounded ends reduce weight and prevent binding and snagging
with rigging
Configuration
Options
A basic stand-alone model can be easily upgraded "in
the field" to accommodate changing needs. Remote configuration,
data acquisition and single-point monitoring of multiple
links are all possible with the hardwired or radio communicaiton
options available with the EDxtreme.
Stand-alone EDxtreme for simple, direct measurement
applications. Available option: basic Communicator with cable for direct connection of Communicator to EDXtreme. |
 |
Single network with one EDxtreme radio dynamometer
and optional Remote Communicator |
 |
Single network with multiple EDxtreme radio dynamometers
and one optional Communicator.
The Communicator offers the ability to monitor the
load at each link as well as viewing the total weight
of multiple dynamometers. |
 |
Multiple network with multiple EDxtreme radio dynamometers
and Communicators. The Communicators
can be set to monitor any dynamometers in the system
or assigned to a specific link or links. |
 |
An RS-232 interface is standard on both the EDxtreme and
optional Communicator for connection to a host PC.
Communications unlock the full potential
of the EDxtreme:
One of the foremost reasons for choosing an electronic dynamometer
is added functionality. The radio or hardwired options available
with the EDxtreme offer the convenience and safety of remote
operation. Additionally, data from the dynamometer(s) can
be downloaded to a PC via an RS-232 connection for compilation
and analysis or to generate hard-copy printouts.
Remote control and radio communications are not new to the
Dillon product line. In fact, it is the depth of Dillon's
experience in this area that led to meaningful innovations
in the design of the EDxtreme and its optional remote Communicator.
Improved radio performance
Unlike the single frequency products on the market today,
the EDxtreme radio dynamometer utilizes leading edge 2.4Ghz
radio frequency technology to eliminate common interference.
This technology will automatically "hop" from frequency
to frequency to establish and maintain the strongest, most
reliable communication.
Dynamic Monitoring and control
The optional Communicator is an extremely
powerful hand-held remote that can define the function and
manage the operation of one or more EDxtreme dynamometers
using wired or radio technologies. Through the programmable
SOFTKEY interface, one Communicator can monitor multiple
dynamometers within the same airspace. In multiple-link lifting
arrays, the Communicator can display readings at any or all
lift points and calculate the total load.
Specifications
Ships with dynamometer, shipping/storage
crate(s), batteries, manual, and certificate
of calibration.
|
- Enclosure: designed to NEMA4X/IP55. Suitable for continuous
outdoor use.
- Accuracy: 0.1% of capacity
- Repeatability: 0.1% of capacity (normal resolution mode)
- Safe overload: 200% of capacity
- Body protection: Aluminum capacities are anodized. Alloy
steel capacities are electroless nickel plated
- Bearings: unmatched repeatability attained by needle
bearings in shackle pin holes up to EDx-10K. Precision
machined shackles act as inner race.
- Shackles: Forged industry standard anchor shackle bows,
galvanized finish. Models up to EDx-10K use precision machined
shackle pin. Higher capacities use forged pin.
- Display: 128 x 64 dot-graphic LCD display shows up to
6 digits 1" (26mm) high plus annunciators and softkeys.
Digits are .11" (7mm) thick for unmatched readability.
- Display Update Rate: 2 times/second
- Connector: Recessed sealed connector may be used for
direct serial communications or connection to a Communicator
remote.
- RS-232 / RS-485: Print or extract data easily. Continuous
output can drive a scoreboard. Configurable poll character.
- Battery Life: 320 hours typical use with two C-cell alkaline
batteries. 40 hours typical with Radio Link system.
- Operating Temp: -4°F to 140°F (-20°C to 60°C)
- Additional specs and diagram
- Configuration options
- Click here for
Acrobat .pdf with complete specs and diagrams of all parts
and accessories (hooks, shackles, Communicator and Radio
specs)
Optional remote control communicator for Dillon EDXtreme dynamometers
EDXtreme Dynamometers - Popular Configurations:
(If you don't
find the exact combination you're looking for, phone 800-832-0055
and we'll help you customize a dynamometer system to meet
your needs)
1) Basic EDXtreme dynamometer with two
anchor shackles (no backlight nor radio)
EDx-2.5K |
2500 x 2 lb /
2500 x 0.5 lb |
1000 x 1 kg /
1000 x 0.2 kg |
10,000 x 10 N/
10,000 x 2 N |
$1185 |
|
EDx-5K |
5000 x 5 lb /
5000 x 1 lb |
2000 x 2 kg /
2000 x 0.5 kg |
20,000 x 20 N /
20,000 x 5 N |
$1325 |
|
EDx-10K |
10,000 x 10 lb /
10,000 x 2 lb |
5000 x 5 kg /
5000 x 1 kg |
50,000 x 50 N /
50,000 x 10 N
|
$1580 |
|
EDx-25K |
25,000 x 20 lb /
25,000 x 5 lb |
10,000 x 10 kg /
10,000 x 2 kg |
100,000 x 100 N /
100,000 x 20 N |
$2020 |
|
EDx-50K |
50,000 x 50 lb /
50,000 x 10 lb |
20,000 x 20 kg /
20,000 x 5 kg |
200,000 x 200 N /
200,000 x 50 N |
$2515 |
|
EDx-100K |
100,000 x 100 lb /
100,000 x 20 lb |
50,000 x 50 kg /
50,000 x 10 kg |
500,000 x 500 N /
500,000 x 100 N |
$4340 |
|
EDx-160K |
160,000 x 200 lb /
160,000 x 50 lb |
75,000 x 100 kg /
75,000 x 20 kg |
n/a |
$8580 |
|
EDx-220K |
220,000 x 200 lb /
220,000 x 50 lb |
100,000 x 100 kg /
100,000 x 20 kg |
n/a |
$11,920 |
|
EDx-330K |
330,000 x 500 lb /
330,000 x 200 lb |
150,000 x 200 kg /
150,000 x 50 kg |
n/a |
$18,470 |
|
EDx-550K |
550,000 x 500 lb /
550,000 x 200 lb |
200,000 x 200 kg /
200,000 x 50 kg |
n/a |
$29,040 |
|
2) Basic EDXtreme dynamometer with two anchor shackles and radio-equipped* (no backlight)
| EDx-2.5K |
2500 x 2 lb /
2500 x 0.5 lb |
1000 x 1 kg /
1000 x 0.2 kg |
10,000 x 10 N/
10,000 x 2 N |
$1725 |
|
| EDx-5K |
5000 x 5 lb /
5000 x 1 lb |
2000 x 2 kg /
2000 x 0.5 kg |
20,000 x 20 N /
20,000 x 5 N |
$1865 |
|
| EDx-10K |
10,000 x 10 lb /
10,000 x 2 lb |
5000 x 5 kg /
5000 x 1 kg |
50,000 x 50 N /
50,000 x 10 N |
$2120 |
|
| EDx-25K |
25,000 x 20 lb /
25,000 x 5 lb |
10,000 x 10 kg /
10,000 x 2 kg |
100,000 x 100 N /
100,000 x 20 N |
$2560 |
|
| EDx-50K |
50,000 x 50 lb /
50,000 x 10 lb |
20,000 x 20 kg /
20,000 x 5 kg |
200,000 x 200 N /
200,000 x 50 N |
$3055 |
|
| EDx-100K |
100,000 x 100 lb /
100,000 x 20 lb |
50,000 x 50 kg /
50,000 x 10 kg |
500,000 x 500 N /
500,000 x 100 N |
$4880 |
|
| EDx-160K |
160,000 x 200 lb /
160,000 x 50 lb |
75,000 x 100 kg /
75,000 x 20 kg |
n/a |
$9110 |
|
| EDx-220K |
220,000 x 200 lb /
220,000 x 50 lb |
100,000 x 100 kg /
100,000 x 20 kg |
n/a |
$12,450 |
|
| EDx-330K |
330,000 x 500 lb /
330,000 x 200 lb |
150,000 x 200 kg /
150,000 x 50 kg |
n/a |
$19,000 |
|
| EDx-550K |
550,000 x 500 lb /
550,000 x 200 lb |
200,000 x 200 kg /
200,000 x 50 kg |
n/a |
$29,570 |
|
*requires a radio-equipped communicator to benefit from this option
3) Basic EDXtreme dynamometer with two anchor shackles -- radio-equipped* and backlight
| EDx-2.5K |
2500 x 2 lb /
2500 x 0.5 lb |
1000 x 1 kg /
1000 x 0.2 kg |
10,000 x 10 N/
10,000 x 2 N |
$1800 |
|
| EDx-5K |
5000 x 5 lb /
5000 x 1 lb |
2000 x 2 kg /
2000 x 0.5 kg |
20,000 x 20 N /
20,000 x 5 N |
$1940 |
|
| EDx-10K |
10,000 x 10 lb /
10,000 x 2 lb |
5000 x 5 kg /
5000 x 1 kg |
50,000 x 50 N /
50,000 x 10 N |
$2200 |
|
| EDx-25K |
25,000 x 20 lb /
25,000 x 5 lb |
10,000 x 10 kg /
10,000 x 2 kg |
100,000 x 100 N /
100,000 x 20 N |
$2640 |
|
| EDx-50K |
50,000 x 50 lb /
50,000 x 10 lb |
20,000 x 20 kg /
20,000 x 5 kg |
200,000 x 200 N /
200,000 x 50 N |
$3135 |
|
| EDx-100K |
100,000 x 100 lb /
100,000 x 20 lb |
50,000 x 50 kg /
50,000 x 10 kg |
500,000 x 500 N /
500,000 x 100 N |
$4955 |
|
| EDx-160K |
160,000 x 200 lb /
160,000 x 50 lb |
75,000 x 100 kg /
75,000 x 20 kg |
n/a |
$9190 |
|
| EDx-220K |
220,000 x 200 lb /
220,000 x 50 lb |
100,000 x 100 kg /
100,000 x 20 kg |
n/a |
$12,525 |
|
| EDx-330K |
330,000 x 500 lb /
330,000 x 200 lb |
150,000 x 200 kg /
150,000 x 50 kg |
n/a |
$19,080 |
|
| EDx-550K |
550,000 x 500 lb /
550,000 x 200 lb |
200,000 x 200 kg /
200,000 x 50 kg |
n/a |
$29,650 |
|
*requires a radio-equipped communicator
to benefit from this option
Click here for Brochure
(Adobe PDF)
|
 |
